|
Member
Longin |
| |
|
| |
 |
|
|
|
|
| |
|
| | COUNTERS AND LENGTH >> TE SERIES COUNTER AND LENGTH >> TE SERIES COUNTER AND LENGTH |
 |
|
|
|
FEATURES
1.Free Prescaler setting
2.EEPROM back up system
3.Conting Frequency select 30Hz/300Hz/1KHz/3KHz
4.Multiply Range input and range output selected
5.All teh function can operate from the panel key |
| 1. ORDERING CODE |
 |
| 2.MODEL AND SPECIFICATION |
| Model |
Preset stage |
Display digit |
counting range |
Input signal |
Max.Counting cps |
| TE-C48P41B |
1 Stage |
4 digit |
0-9999 |
4-30V |
10KHz |
| TE-C48P81B |
1 Stage |
8 digit |
0-99999999 |
4-30V |
10KHz |
| TE-C72P41B |
1 Stage |
4 digit |
0-9999 |
4-30V |
10KHz |
| TE-C72P81B |
1 Stage |
8 digit |
0-99999999 |
4-30V |
10KHz |
| TE-C49P62A |
1 Stage |
6 digit |
0-999999 |
4-30V |
500KHz | |
| 3. SPECIFICATIONS |
| Power voltage |
AC90-250V (50HZ/60HZ) |
| Consumption |
¡Ü5VA (at AC 220V 50HZ |
| Display range |
6 digit :-999999-999999 |
| Input signal |
touch input,collector input,sensor input, inout resistance 5K¦¸,low calm 0-2V,high calm 4-30V |
| measuring |
DC 12V¡À10% 50mA max |
| overflow |
When measuring £¦#118alue came 6 digit ,display "-------" |
| reposition mode |
hand repositon,self repostion, outside add signal repostion |
| output mode |
N,F,C,R |
| input mode |
addution,subtration,add-sub(each other difference input) |
| assustabt voltage |
DC 12V¡À10% 50mA max |
| Insulation voltage |
100M/min (Between lead electric end and bare very using metal,not connect touch) |
| Insulation strength |
AC200V,50HZ/60HZ 1min (Between lead electric end and bare very using metal,not connect touch) |
| anti-jamming |
Use noise anti-jammingsirnulatorside wave disturb:+2KV(between power end)¡¢+500V (between input end) |
| work condition |
0-50¡æ 45%-85%RH | |
| 4.CONNECTION DIAGRAM |
 |
| 5.THE OUTSIDE DIMENSION |
 |
| 6.CAUTIONS |
1.The meter must be heating 15 minutes with the power on before use.
2.Use in ambient temperatures of 0¡æ to 40¡æ,humidifies of 85% R.H.
3.The meter alignment interval time is one year.
4.If the input signal is superimposed with high-frequency noise,use a High-pass filter in the input signal line.
5.Input wire should not be too long. If measured signal and meter is long, please use a 2-core shielded cable, and connect its outer shite to the LO side at a signal soure.
6.If the digit meter relay is not used for a long time. Please counect power supply once every three months, not less
than 4 hours each time. | |
|
| Hit amount£º1835 Date £º2004-10-23 ¡¾Print page¡¿ ¡¾Back¡¿ |
|
|
| |
| |
|
Home¡¡
